Primula MAGIC INOX High Pressure Pan

Primula MAGIC INOX

High pressure boiler with 1 iron

High pressure boiler with 2.5 litre tank and 1 steam iron. Magic Inox is made for use in small shops, tailors and studios. Comes with cable holder and iron stand-off of silicone. Available with or without stand with wheels. Boiler without tripod can easily be supplemented afterwards. Can also be mounted on eco dob ironing table. Thanks to the 4-pin socket, it is easy to switch between steam iron, steam brush and steam gun.

Product sheet (pdf) English

More machines for the Tailoring / Studio / Shop

detail

Primula ATMOS High Pressure Pan

Primula ATMOS

High pressure boiler with 1 iron

High pressure boiler with 5 litre tank and 1 steam iron. Built-in alarm signal for low water level. Suitable for smaller shops, tailors and studios. Comes with a cable holder and iron stand-off made of silicone. Available with or without stand with wheels. Boiler without tripod can easily be supplemented afterwards. Can also be mounted on eco dob ironing table. Thanks to the 4-pin socket, it is easy to switch between steam iron, steam brush and steam gun.

Product sheet (pdf) English

More machines for the Tailoring / Studio / Shop

detail

Primula ECO VAPOR high pressure boilers

Primula ECO VAPOR

High pressure boilers

Industrial steam generator for continuous operation

Available in different models and with connection for one or more steam irons depending on power - from 2.5kW up to 6kW. All functions are electronically controlled. Comes with a 20 liter water tank and a service tank for boiler draining. Equipped with wheels for easy transport. Suitable for clothing, dry cleaning, clothing stores and studios. Complete with high pressure iron, steam brush, steam finisher or steam gun.

Product sheet (pdf) English

More machines for the Clothing industry
More machines for the Tailoring / Studio / Shop
More machines for the Laundry industry

detail

Hightex 7273PLK/R, programmable automatic wood machine

Programmable automatic wood machine

Heavy duty industrial sewing mask for automatic threading of rope ends. Automatic heat cutter wire cut for cutting very thick polyester and nylon wire without lashing. Affordable automatic wood machine for both rope and nylon straps. The machine can sew materials with diameters from 6 mm to 22 mm and is most often used in the rope, arborist, rock and sports climbing, safety equipment, slings and lashings industries. Sewing patterns can be stored in the machine's built-in memory and the operator can design, edit and save sewing patterns using the easy-to-use LCD screen and interactive touchscreen keyboard. The software is easy to use and can be quickly learned even by inexperienced operators.

More machines for the Belts & Seals industry

detail

Hightex 733PLC/R, programmable automatic wood machine

Programmable automatic wood machine

Very powerful industrial sewing machine for automatic threading of rope ends. Pattern for threading safety ropes from 10 to 28 mm or 20 mm thick Dyneema, Spectra and UHMWPE ropes, including offshore ropes, mooring lines, towing lines and other marine ropes. The special extra large grapple and flushing capacity provide high efficiency when sewing products with extra thick wire.

More machines for the Belts & Seals industry

detail

Gold Line 2D MOPA Fiber Laser

GoldLine fiber lasers are highly reliable, versatile and easy to use marking lasers. It is perfect for all needs: it can be used both in a compact table-top unit or to be integrated directly into a production line or into our larger Gantry systems. This new technology has revolutionised laser marking. This with an extremely low energy consumption, minimal maintenance and an exceptional quality/price ratio completes the picture, making Gold Line fiber lasers interesting and suitable for all applications. Available in 20, 30, 60 and 100W in MOPA version. https://youtu.be/8lhDLrkukFY For more videos follow our channel on YouTube

detail

Diamond Line 3D MOPA Fiber Laser

Diamond Line are innovative 3D marking systems that can follow the profile of the object while it is constantly in focus. Thanks to a revolutionary feature, this device can laser mark on curved surfaces, both in standard geometric shapes (spheres, spheres, cylinders, cones and inclined planes ) but also in complex and irregular profiles. This device can cope with a height difference of up to 40mm on the object. Diamond Line fiber lasers are equipped with the best fiber sources on the market. They are characterized by high performance, incomparable marking speed and incredible high precision. Available in 20, 30, 60 and 100W in MOPA version. All our systems can be customized according to the customer's requirements on laser source and workstation. https://youtu.be/-QzbK2T9TCk For more videos follow our channel on YouTube

detail

LaserEvo Gantry SD

Gantry System Slide Door

This Gantry workstation is equipped with two sliding doors that you open manually. The workstation is equipped with four motorized axes that are directly managed by software. For this unit you then choose a 2D or 3D Fiber Laser with 20, 30 or 60 W laser source or a MOPA laser solution. Which laser solution it will be is almost always based on the test markings we made for you at an earlier stage. In a Gantry machine it is possible to mark many items in a single run or to engrave a large product in several places or mark contiguously over a large area. The working range of the Gantry system starts from 700×400 x (Z) 300 mm up to e.g. 1200 x 800 x (Z) 500 mm. The size of the work table is adapted to the customer's wishes, needs and requirements. Robust mechanics guarantee maximum precision and versatility and a system with dual linear guides also supports heavy loads. https://youtube.com/watch?v=-c60vmxDSfE&feature=shares For more videos follow our channel on YouTube

detail

LaserEvo Gantry CEO

LaserEvo Gantry Vertical Door

This Gantry workstation is equipped with a vertical hatch that opens and closes pneumatically. It is also equipped with two optical sensors to completely eliminate the risk of jamming. The workstation is equipped with four motorized axes that are directly managed by software. For this unit, you then choose a 2D or 3D Fiber Laser with 20, 30 or 60 W laser source or a MOPA laser solution. Which laser solution it will be is almost always based on the test markings we made for you at an earlier stage. In a Gantry machine it is possible to mark many items in a single run or to engrave a large product in several places or mark contiguously over a large area. Watch video. The working range of the Gantry system starts from 700×400 x (Z) 300 mm up to e.g. 1200 x 800 x (Z) 500 mm. The size of the work table is adapted to the customer's wishes, needs and requirements. Robust mechanics guarantee maximum precision and versatility and a system with dual linear guides also supports heavy loads. https://youtube.com/watch?v=-c60vmxDSfE&feature=shares For more videos follow our channel on YouTube

detail

GCC LaserPro S290 LS

Reliable and cost-effective fiber label laser that enables perfect marking on most metal and plastic materials. The S290 LS has a large work table, equipped with a fiber laser source that gives spectacular rated results. Whether it's laser marking on metal surfaces, plastic surfaces or tools, the S290LS produces the finest laser marking. In addition, innovative features developed from spirit series' many years of experience make the S290LS the most user-friendly laser marking system on the market.

Product sheet (pdf) English

Drag-N-Play. An incredibly innovative and user-friendly feature based on servo motor technology that simplifies operation and shortens set-up time. Simply drag the lens carriage of the laser by hand to the desired position to be engraved and press the start button to begin the job.
SmartPIN™ autofocus (patented). The plug-and-play design makes focusing a simple process, providing the accuracy and precision required for optimum quality at the touch of a button, even when laser engraving on transparent materials.
The super user-friendly SmartCENTER™ feature helps you easily and automatically locate the centre point of objects of any shape, greatly eliminating tedious installation time.

https://youtu.be/C1eLEYEW6Ls For more videos follow our channel on YouTube

detail

LaserEvo Gantry 500×300

LaserEvo Gantry 500x300

Our "smallest" Gantry workstation is equipped with two sliding doors that you open manually. The workstation is equipped with three motorized axes that are directly managed by software. For this unit you then choose a 2D or 3D Fiber Laser with 20, 30 or 60 W laser source or a MOPA laser solution. Which laser solution it will be is almost always based on the test markings we made for you at an earlier stage. In a Gantry machine it is possible to mark many items in a single run or to engrave a large product in several places or mark contiguously over a large area. Watch video. This Gantry workstation has a working area of 500x300 x (Z) 200 mm. Robust mechanics ensure maximum precision and versatility and a dual linear guide system supports even heavy loads. https://youtube.com/watch?v=Fjrwf9llzSY&feature=shares For more videos follow our channel on YouTube

detail

LaserEvo Table Model

LaserEvo Table Model with 3 Open Sides

A traditional class 1 safety cabinet with 3 open sides. This model is equipped with a pneumatic hatch that opens on 3 sides for easy insertion and removal of items to be labelled. For this unit, you then choose a 2D or 3D Fiber Laser with 20, 30 or 60 W laser source or a MOPA laser solution. Which laser solution it will be is almost always based on the test markings we made for you at an earlier stage. https://youtu.be/s8hirchJtGE For more videos follow our channel on YouTube

detail